Play LED light sequences from csv. Control LED lights using PyDMXControl Install... https://github.com/MattIPv4/PyDMXControl/tree/master Calc fields / Variables: # seq -> "sequence" = position (seconds) on 'timeline' starting 0 # fadein / fadeout (milliseconds) [optional/default] # duration (seconds) # brightness -> 0-255 (optional, else default) [optional/default] # "channel" --> LED/channel identifier, order as connected to DMX decoder (channel = name | opendmxcontroller calls fixtures "by_name") - channels are sequential and fixed - blank channels also must be added to dmx..() ## Map channels: (play one at a time, wait for input) $ python3 mapchannels.py # run sequence: - $ python3 sequence.py # run sequence from START cell (not from t=0): - $ python3 zztest_sequence.py ## debug: (play single channel only and exit) $ python3 playsingle.py _____ *** EDIT ("seq", "duration", optional "brightness") and play sequence: - edit local or online calc/csv # get csv -> sequence.json - $ python3 getspread.py - restart service - OR edit in json, save, restart service _____ # check script output: $ tmux a or $ tmux a -t light --- lights.service runs sequence.py in a tmux session called "light" (Run outside tmux) # start/stop/restart service now sudo systemctl lights.service # enable/disable service on boot sudo systemctl lights.service # check status systemctl status lights.service --- *dev* service script: xetc_systemd_system -> lights.service edit here if required, and copy to /etc/systemd/system ------- DMX512 decoder 24channel color - Dip Switch positions = start channel no. ... (for daisy chain) (dip switch positions) ( <-- binary. ** Right to Left for dipsw positions) - board#1: 1-24 | all 'off' (0) | 0 - board#2: 25-48 | 1,4,5 - ON (1) | 11001 - board#3: 49-72 | 1,5,6 - ON | 110001 - board#4: 73-...| 1,4,7 - ON | 1001001 ____